Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

How can I configure 1 Port channelized 3640 balanced ISDN/PRI.

Hi,

Can someone suggest me the possible configuration for above router if I want to use 15 ISDN channel.

I will be grateful for all your suggestions.

Thanks

Sid

4 REPLIES
Silver

Re: How can I configure 1 Port channelized 3640 balanced ISDN/PR

Hi Sid,

Not sure what you want, but if it is to use a multilink bundle of max 15 channels, you could use something like:

!

controller E1 1/0

pri-group timeslots 1-31

!

..stuff..

!

interface Serial 1/0:15

..stuff..

encapsulation ppp

dialer pool-member 1 max-link 15

..stuff..

ppp multilink

!

..stuff..

!

interface Dialer1

..stuff..

encapsulation ppp

dialer pool 1

..stuff..

ppp multilink

!

If you want to 'use' channel 15 of the PRI, you are out of luck if you want to use it as a PRI. If you want to use it as a framed E1, you should configure it like this:

!

controller E1 1/0

framing NO-CRC4 ! We use this in Norway..

channel-group 0 timeslots 1-31

!

It's not possible to configure it as a unframed E1.

//Stig

Community Member

Re: How can I configure 1 Port channelized 3640 balanced ISDN/PR

Hi Stig,

I want to configure this as a main router and accessed by 12 different satellite router i.e Satellite routers will be just dialing in this router.

I will try your suggestion and post the results.

Thanks

Sid

Silver

Re: How can I configure 1 Port channelized 3640 balanced ISDN/PR

Community Member

Re: How can I configure 1 Port channelized 3640 balanced ISDN/PR

Hi Stig,

Thanks a lotand much obliged for your advice.

Regards

Sid

289
Views
0
Helpful
4
Replies
CreatePlease to create content