How can I let remote analog users cancel dial-back.
I have analog and ISDN users dialing into a 3640 with PRI ISDN and DMM's. I authentcate with RSA ACE Server and Authorise with Cisco ACS. All analog users are set up for roaming dial-back. This works fine unless a user decides not to use dial-back and cancels at the phone-number prompt. The line is then disconnected. If the user is set in ACS for dial-in only this works OK. All the ISDN users are dial-in only and work OK.
Current configuration : 2541 bytes
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
logging buffered 26144 debugging
no logging console
aaa authentication login default group tacacs+
aaa authentication ppp default group tacacs+
aaa authorization exec default group tacacs+
aaa authorization network default group tacacs+
aaa accounting exec default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
enable password voyager
username root privilege 15 password 0 use_acs
clock timezone GMT 1
clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 2:00
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...