Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how can I see the traffic details in cw2k?

how can I see the traffic details?

I have installed the first five CDs,include the 5th CD(ngenius),and I have start the ngenius server(win2k will open a DOS window,and after the service started,the window disappeared),how can I see the traffic detail(for instance,ftp is about 50%,www is about 40%,pop3 is 5%;or tom is about 20%,jerry is about 10%,but leo ocuppy 30% bandwith,etc)?in CW2K menu,there is no any options about realtime monitor

8 REPLIES
New Member

Re: how can I see the traffic details in cw2k?

Hi, look at Management Connection. If there is not a connection you can make the integration. Read the conversation "Connection Files for RTM 1.4".

Hope this help.

Andrea.

New Member

Re: how can I see the traffic details in cw2k?

there are only 4 sub-menus in management connection:case management,cco tools,device navigator,administration.

in administration,there is an option named "creat",if click create,it will make u create a connection,but how can I fill the "name,version,server name,foldname,url..."?

and how can I make the intergration?could u tell me the url of "connection files for rtm 1.4"?

the topnology of my company is a CISCO 827 and a lot of PCs

thanks

New Member

Re: how can I see the traffic details in cw2k?

Use http://yourserver:8080 from your browser to connect the RTM, then add a device from administration menu. Read the conversation in this forum to integrate the CW menu.

Do you have a probe?

Andrea.

New Member

Re: how can I see the traffic details in cw2k?

it has no a menu named Administrate,when I input http://server:8080 in NETSCAPE,just 4 options:Traffic monitor,server,voip,packet analyzer.,I can add a device in server menu(it's a cisco 827),but it tells me there are errors when finish add.when contact,it tells me:ping&read community&write community are ok,snmp protocal supported,protocal&application&high-capacity monitoring&application response time&resource monitoring&http content response time&voip&diffirent service NOT SUPPORTED.does it mean I can NOT realtime-monitor the traffic(such as ftp is 40%,http is 25%,etc)?

need I config something in CISCO827?

New Member

Re: how can I see the traffic details in cw2k?

You can access your RTM server in two ways ... directly or thru CW. To do the latter read this url

http://www.cisco.com/en/US/products/sw/cscowork/ps2803/products_qanda_item09186a0080094b24.shtml#4a

As for seeing protocol traffic (ftp, pop etc) ... You would need to add probes. I think Cisco (Netscout ) has stopped selling them, but I am not sure.

New Member

Re: how can I see the traffic details in cw2k?

Web based interface accessed using

http://nGeniusServer:8080 (nGeniusServer = your server name)

You'll also need RMON probes (Netscout or NAM cards, etc).

New Member

Re: how can I see the traffic details in cw2k?

u mean I need a hardware for my 827?and could tell me which models product of cisco support rmon?how to config rmon?if the product doesnot support rmon,it means CW2K can't monitor its traffic,yes?

New Member

Re: how can I see the traffic details in cw2k?

Cw2k can monitor application data with the help of an RMON probe (seperate hw). What you have in most of the catalyst models are mini-RMON (alarm, threshold,statistic,history) but to be able to look a little bit further up in the OSI model, you need to buy a RMON probe. Starting at 6-7000$ for a netscout probe.

Take a look at QoS Device Manager . With that tool you are able to get a picture of what type of applications there are on a certain link. ( There are some drawbacks ex: not all routers, IOS are supported)

Hope this help.

H/Jorgen

121
Views
0
Helpful
8
Replies