Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

How configure a 2610 to receive incoming calls

Hello, i must configure a 2610 with IOS 12.2(8)T that have a WIC 1MTF-G703 to receive incoming calls, but I no have idea.

Can anybody help me, please?

1 REPLY
Cisco Employee

Re: How configure a 2610 to receive incoming calls

You can receive the incoming voice calls over that VWIC-1MFT-G703, which is 1 port E1 line, from PSTN. Here is the link which explains how to configure that

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t7/t1_mf_t6.htm

After that depending on the network setup, you need to configure dial-peers etc For that here is the link which will help you for that

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_1/voip/examples.htm

93
Views
0
Helpful
1
Replies
CreatePlease to create content