How configure a PPP and 2 BRI backup line from a 2621 to a 2503
I have a scenario of setting up a network for customer.
On the customer end, we have a 2621 connected to a 2503 (we name this as PRI router) on our side with a 1Mb leased line. On event in case the leased line is down, we have 2 128k ISDN line as a backup. Now the problem is, how do I configure in a way that from 2621 (with a 4 port BRI module) connected 2 ISDN line to PRI router and to the another same model router. Both 2503 router is connected to a 1500 series switch.
What can I do to make both 2503 router connected to 2621 router to run both at the same time, when is backup is activatied.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...