08-21-2006 11:17 AM - edited 03-03-2019 04:36 AM
Hi,
Doe have to create a Port-Channel to make the CSM <---- > MSFC communicate ?
Regs
Kas
Solved! Go to Solution.
08-21-2006 11:30 AM
You don't have to create port-channels with MSFC like you did with MSM, the integration is seamless.
The only difference you may see is when running Hybrid vs Native IOS. With Native IOS, routing and switching features are within the same config while with Hybrid, the switch configuration is running under CATOS while the routing configuration is running Native IOS.
Please rate helpful posts.
Thanks
08-21-2006 11:30 AM
You don't have to create port-channels with MSFC like you did with MSM, the integration is seamless.
The only difference you may see is when running Hybrid vs Native IOS. With Native IOS, routing and switching features are within the same config while with Hybrid, the switch configuration is running under CATOS while the routing configuration is running Native IOS.
Please rate helpful posts.
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: