Yes, that's the amount of RAM in your router. Add the two figures together for total: 131072K (128MB).
The figure before the slash is the amount of RAM that has been allocated for use as processor or system memory. Processor memory is used to store the running configuration and routing tables, and is where the IOS software is run.
The figure after the slash shows how much RAM has been allocated for use as I/O or shared memory. I/O memory is used for buffering packets on your router's network interfaces.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...