11-19-2002 01:20 AM - edited 03-02-2019 02:59 AM
I have today on my e0/0 interface of my 2600 router 2 IP addresses :
interface Ethernet0/0
ip address 62.185.209.129 255.255.255.128 secondary
ip address 172.25.0.1 255.255.128.0
Can I configure a third IP address ex 193.53.175.36 to the same Interface
or what is the maximum number and what is the command ?
Solved! Go to Solution.
11-19-2002 06:20 AM
To add another ip subnetwork to your E0/0 interface simply put the following command in your configuration, under the interface.
config t
interface e0/0
ip address 193.53.175.36
So your final config will look like this.
interface Ethernet0/0
ip address 62.185.209.129 255.255.255.128 secondary
ip address 193.53.175.36
ip address 172.25.0.1 255.255.128.0
Hope this helps,
Don
11-19-2002 06:20 AM
To add another ip subnetwork to your E0/0 interface simply put the following command in your configuration, under the interface.
config t
interface e0/0
ip address 193.53.175.36
So your final config will look like this.
interface Ethernet0/0
ip address 62.185.209.129 255.255.255.128 secondary
ip address 193.53.175.36
ip address 172.25.0.1 255.255.128.0
Hope this helps,
Don
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: