how can the longer-prefixes example used throw up the networks including 10.134.0.0
The following is sample output using the longer-prefixes keyword. When the longer-prefixes keyword is included, the address and mask pair becomes the prefix, and any address that matches that prefix is displayed. Therefore, multiple addresses are displayed.
In the following example, the logical AND operation is performed on the source address 126.96.36.199 and the mask 188.8.131.52, resulting in 184.108.40.206. Each destination in the routing table is also logically ANDed with the mask and compared to that result of 220.127.116.11. Any destinations that fall into that range are displayed in the output.
Router# show ip route 18.104.22.168 22.214.171.124 longer-prefixes
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.