How does this ADD latency at a 200ms level? All you've really done is lower your bandwidth. You are just requiring more packets and app turns to give you the appearance of latency. The Aux port isn't going to let you control latency.
The only way that you are going to get a 200ms delay is to purchase a satelite simulator. That is what I assume you are wanting to simulate in your test network. The delay command is nothing but for using in routing protocols and adding packet loss to the network isn't going to add delay either, its just going to add packet loss. Just to a serch for the device and you will find a lot of companies that sell them.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...