Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to Check the serial number on 7206 VXR remotly

Show ver dosn't show the serial number:

Sunset_newT3#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(14)E, EARLY DEPLOYMENT RELEASE


TAC Support:

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Sat 14-Dec-02 00:28 by eaarmas

Image text-base: 0x60008C08, data-base: 0x612B0000

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVEL


BOOTLDR: 7200 Software (C7200-KBOOT-M), Version 12.1(3a)E5, EARLY DEPLOYMENT REL


Sunset_newT3 uptime is 24 weeks, 4 days, 19 hours, 54 minutes

System returned to ROM by reload at 18:40:44 PST Sat Dec 21 2002

System restarted at 18:42:02 PST Sat Dec 21 2002

System image file is "disk0:c7200-is-mz.121-14.E.bin"

cisco 7206VXR (NPE400) processor (revision A) with 245760K/16384K bytes of memory.

Processor board ID 21285963

R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2, 4096KB L3 Cache 6 slot VXR midplane, Version 2.1

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

1 Gigabit Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

8192K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x102



Re: How to Check the serial number on 7206 VXR remotly

No Way unless someone coded into the snmp chassis-id

New Member

Re: How to Check the serial number on 7206 VXR remotly

Thanks for you ans

So how does it works in other models link 6500 or 3500....

Re: How to Check the serial number on 7206 VXR remotly

I think "show diag" or "show diagbus" should help in case of 7200.

Regarding your second question, I thought this discussion ( which was posted way back in 2002) might be of interest to you. Check it out.

CreatePlease to create content