Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

How to configure a router to connect a TCP/IP server to X.25 server?

We have a TCP/IP server at one location and another X.25 server at same location but at a distance. We have to establish connectivity betw' these boxes and data transfer should be possible.

We have one customer already having similar setup connected through Motorola router and RS232 V.24 modem.

we would like to use CISCO router to do the connectivity in the new setup but do not find any help in cisco site.

Request to send some document or cisco site to implement this

2 REPLIES
Bronze

Re: How to configure a router to connect a TCP/IP server to X.25

You need to use protocol translation, which will translate TCP to X25 and vice versa.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ftersv_c/dcdpt.htm

Bronze

Re: How to configure a router to connect a TCP/IP server to X.25

If you want the TCP IP server to talk to an X25 server - you can have a router in the middle that will do the X25 to TCP translation and vice versa. Here is a link on this:

http://www.cisco.com/warp/public/133/x25_tcptrans.html

hope that helps

510
Views
0
Helpful
2
Replies
CreatePlease to create content