Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Silver

How to convert a Hybrid Sup3 to a Native IOS Sup3

I have redundant 6509's with currently 1 sup 3 board in each. The Sup3's are running Native mode. The Sups are not running redundant to themselves. If I lose a switch, I have to physically move cables from one switch to the other. I have just received 2 new Sup3 boards that are configured for Hybrid. How can I incorporate the new Hybrid boards into the NAtive system and convert the new boards to NAtive and get the MSFC's and Sups to back each other up? Is there a simple document or URL that anyone can direct me to? Or has anyone experienced this for themselves???

3 REPLIES
Cisco Employee

Re: How to convert a Hybrid Sup3 to a Native IOS Sup3

There is no "Sup3" for 6500. Did you mean to say a Sup720? Here are the conversion process.

http://www.cisco.com/warp/public/473/81.html

http://www.cisco.com/warp/public/473/80.shtml

If you have a Sup32, we do not have Native IOS for it at this time.

Silver

Re: How to convert a Hybrid Sup3 to a Native IOS Sup3

Starting from 12.2(18)SXF , native IOS is available for sup32/msfc2a.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm

thanks

Salman Z.

Silver

Re: How to convert a Hybrid Sup3 to a Native IOS Sup3

My mistake, sorry. I do have Sup 2 modules, not Sup 3's. Thanks for correcting me....

89
Views
0
Helpful
3
Replies
CreatePlease to create content