I have a 6509 and I configured port channel as follows.
set port channel 2/1,4/1 1
set port channel 3/7,4/7 2
set port channel 3/8,4/8 3
set port channel 1/1,2/8 10
set port channel 2/2,3/2,4/2 11
set port channel 2/3,4/3 12
set port channel 2/6,4/6 14
set port channel 2/7 96
set port channel 2/4,4/4 131
set port channel 2/5,4/5 132
However I want to erase that configuration. I used the set port channel mode off, and I see now on the module configuration that the port channel is disable. However I still see the port channel configuration when I do a show run. How can I refresh or delete this configuration. I dont want to see any set port channel anywere.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.