Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

how to do the route on 2514

2514(2 ethernet)

1st ethernet: 192.168.0.6/24

2st ethernet: 10.0.0.1/8

my PC: 192.168.0.3/24

in my pc, how to ping 10.0.0.1

2 REPLIES
Bronze

Re: how to do the route on 2514

Your PC needs to have a default gateway set up, pointing to 192.168.0.6. Then you should be able to ping 10.0.0.1 since it is directly attached to the router.

Silver

Re: how to do the route on 2514

Also if your network goes more into depth, don't forget to turn on some simple routing protocol. Like RIP.

!ip routing

!router rip

!network 192.168.0.0

!network 10.0.0.0

Also, check if part of your network is not blocking ICMP packets (firewall for example), otherwise all of the ping's will return error.

112
Views
0
Helpful
2
Replies