Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to enable multicast on 3550 SMI Image

Hello Guys,

I got one Cat 6509 and several Cat 3550 in the Bulding. I wannt to enabling Multicast on several 3550. Cann some one tell my why it not works ? what is missing on the config ? My config look like this :

Thanks for any help

AFE

SW01-6509GL711> (enable)

#igmp

set feature vrrp-flood disable

!

#rgmp

set rgmp enable

!

#mls

set mls nde version 8

set multicast router 4/3-5,4/8

set trunk 4/1 off negotiate 1-1005,1025-4094

set trunk 4/2 off negotiate 1-1005,1025-4094

set trunk 4/3 off negotiate 1-1005,1025-4094

set trunk 4/4 off negotiate 1-1005,1025-4094

set trunk 4/5 off negotiate 1-1005,1025-4094

set trunk 4/6 off negotiate 1-1005,1025-4094

set trunk 4/7 off negotiate 1-1005,1025-4094

set trunk 4/8 off negotiate 1-1005,1025-4094

!

#module 5 : 16-port 1000BaseX Ethernet

set module name 5 Uplink Access

set vlan 300 5/1,5/16

set port name 5/1 DVAGGHOST

set port name 5/16 UG

set multicast router 5/1

------------------------------------------------------

RT01-6509GL7-11#

ip multicast-routing

no mls ip multicast aggregate

interface Loopback0

ip address 10.61.254.249 255.255.255.252

ip pim sparse-dense-mode

!

interface Vlan314

description 4OG

ip address 10.61.204.2 255.255.255.0

ip helper-address 10.61.10.100

ip helper-address 10.61.10.101

no ip redirects

ip pim sparse-dense-mode

standby use-bia

standby ip 10.61.204.1

standby timers 3 10

standby priority 120

standby preempt

standby authentication Vlan314

ip pim rp-address 10.61.254.249

ip pim send-rp-announce Loopback0 scope 16

ip pim send-rp-discovery scope 16

2 REPLIES
Community Member

Re: how to enable multicast on 3550 SMI Image

Hi,

Why is the multicast router statically set to 5/1? If this is a Cat6k with MSFC, it should be set to 15/1.

-Robert

Community Member

Re: how to enable multicast on 3550 SMI Image

Hello Robert,

thanks for your replay ! just to say that i solve the problem : since i configure the ip pim in Vlan 300 where my Ghost server is located.

Thanks

AFE

246
Views
0
Helpful
2
Replies
CreatePlease to create content