Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

How to erase Configuration on a 4006

Hello,

I have a 4006 that I've used in a lab environnement and know I Would like to erase all the startup config . I've tried to do the erase startup-config command and then reload , but nothing happend .. My config register is 0x2102 .. and I boot from the bootflash:

Thank you for your help

  • Other Network Infrastructure Subjects
3 REPLIES
Cisco Employee

Re: How to erase Configuration on a 4006

It depends on the Supervisor and Operating system you are using.

Cat 4006 with SupI or Sup II and Cat OS:

clear config all

Cat 4006 with Sup III or IV and IOS:

wr erase

reload

(answer N to save config)

Hope this helps,

LW

New Member

Re: How to erase Configuration on a 4006

yes thanks a lot

Cisco Employee

Re: How to erase Configuration on a 4006

If it is a Sup3/4, you'll need to delete the vlan.dat file as well. The following page should help

http://www.cisco.com/warp/public/473/156.html

295
Views
0
Helpful
3
Replies
This widget could not be displayed.