Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

How to fix "%PA-2-UNDEFPA" ?

Hi, sir

There is cisco7204 with NPE150.

System Bootstrap, Version 11.1(5) [mkamson 5], RELEASE SOFTWARE (fc1)

C7200 processor with 49152 Kbytes of main memory

IOS (tm) 7200 Software (C7200-IS56I-M), Version 12.1(15), RELEASE SOFTWARE (fc1)

Slot 3 with PA-2H.

reload 7204 message below:

%PA-2-UNDEFPA: Undefined Port Adaptor type 130 in bay 3

%PA-3-DEACTIVATED: port adapter in bay [3] powered off.

%SYS-4-CONFIG_NEWER: Configuration from version 12.1 may not be correctly understood

Please kindly tell how to fix ? Thank you.

3 REPLIES
Cisco Employee

Re: How to fix "%PA-2-UNDEFPA" ?

Was this PA-2H card working fine before? Looks like it needs a newer IOS. Can you paste the output of sh ver

http://www.cisco.com/cgi-bin/Support/Errordecoder/error_decoder.pl?index=ios&query=PA-2-UNDEFPA&counter=0&paging=5&links=reference&sa=Submit

Try the software advisor to determine what software version you need

http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl?Introduction=True

New Member

Re: How to fix "%PA-2-UNDEFPA" ?

This PA-2H working fine before. even have the UNDEFPA message, the PA-2H

still working fine.

System Bootstrap, Version 11.1(5) [mkamson 5], RELEASE SOFTWARE (fc1)

Copyright (c) 1994 by cisco Systems, Inc.

C7200 processor with 49152 Kbytes of main memory

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

Self decompressing the image : ######################################################

#####################################################################################

########### [OK]

%PA-2-UNDEFPA: Undefined Port Adaptor type 130 in bay 3

%PA-3-DEACTIVATED: port adapter in bay [3] powered off.

%SYS-4-CONFIG_NEWER: Configuration from version 12.1 may not be correctly understoodC

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

CCCCCCCCCCCCCCCCCCCCCCCCCCCCCC

Read 9397492 bytes from file slot0:c7200-is56i-mz.121-15.bin

Self decompressing the image : ######################################################

#####################################################################################

#####################################################################################

#####################################################################################

#####################################################################################

#####################################################################################

#####################################################################################

#####################################################################################

#####################################################################################

#####################################################################################

########################################## [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS56I-M), Version 12.1(15), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Tue 14-May-02 00:07 by kellythw

Image text-base: 0x60008950, data-base: 0x6169E000

Compliance with U.S. Export Laws and Regulations - Encryption

This product performs encryption and is regulated for export

by the U.S. Government.

This product is not authorized for use by persons located

outside the United States and Canada that do not have prior

approval from Cisco Systems, Inc. or the U.S. Government.

This product may not be exported outside the U.S. and Canada

either by physical or electronic means without PRIOR approval

of Cisco Systems, Inc. or the U.S. Government.

Persons outside the U.S. and Canada may not re-export, resell,

or transfer this product by either physical or electronic means

without prior approval of Cisco Systems, Inc. or the U.S.

Government.

cisco 7204 (NPE150) processor (revision B) with 43008K/6144K bytes of memory.

Processor board ID 3652088

R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache

4 slot midplane, Version 1.0

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

16 Serial network interface(s)

2 HSSI network interface(s)

125K bytes of non-volatile configuration memory.

1024K bytes of packet SRAM memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

4096K bytes of Flash internal SIMM (Sector size 256K).

Press RETURN to get started!

00:00:09: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

00:00:09: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/1, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/2, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/3, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/4, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/5, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/6, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial1/7, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/0, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/1, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/2, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/3, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/4, changed state to down

00:00:09: %LITACNK-3-UPDOWN: Interface Serial2/5, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/6, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Serial2/7, changed state to down

00:00:09: %LINK-3-UPDOWN: Interface Hssi3/0, changed state to up

00:00:09: %LINK-3-UPDOWN: Interface Hssi3/1, changed state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, ch

anged state to up

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/4, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/5, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/6, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/7, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/1, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/2, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/3, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/4, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/5, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/6, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/7, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Hssi3/0, changed st

ate to up

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Hssi3/1, changed st

ate to down

*Aug 16 06:07:34: %SYS-5-CONFIG_I: Configured from memory by console

*Aug 16 06:07:35: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS56I-M), Version 12.1(15), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Tue 14-May-02 00:07 by kellythw

*Aug 16 06:07:35: %SYS-6-BOOTTIME: Time taken to reboot after reload = -24828 seconds

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/0, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/1, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/2, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/3, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/4, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/5, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/6, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/7, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/0, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/1, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/2, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/3, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/4, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/5, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/6, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/7, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Hssi3/1, changed state to administrative

ly downACS+ Authentication is ENABLED in this router TP-7204!!Checking TACACS+.......

Sorry, TACACS+ Authentication is disable, use ENABLE PASSWORD to enter!!!

Password:

*Aug 16 06:07:48: %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 10.64.111.241 (Hssi3/0) is

up: new adjacency

TP-7204#sh log

Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)

Console logging: level debugging, 61 messages logged

Monitor logging: level debugging, 0 messages logged

Buffer logging: level informational, 61 messages logged

Trap logging: level informational, 65 message lines logged

Logging to 10.64.24.5, 65 message lines logged

Log Buffer (4096 bytes):

06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state t

o down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/1, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/2, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/3, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/4, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/5, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/6, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/7, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/1, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/2, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/3, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/4, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/5, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/6, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/7, changed

state to down

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Hssi3/0, changed st

ate to up

*Aug 16 06:07:34: %LINEPROTO-5-UPDOWN: Line protocol on Interface Hssi3/1, changed st

ate to down

*Aug 16 06:07:34: %SYS-5-CONFIG_I: Configured from memory by console

*Aug 16 06:07:35: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS56I-M), Version 12.1(15), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Tue 14-May-02 00:07 by kellythw

*Aug 16 06:07:35: %SYS-6-BOOTTIME: Time taken to reboot after reload = -24828 seconds

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/0, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/1, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/2, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/3, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/4, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/5, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/6, changed state to administrati

vely down

*Aug 16 06:07:35: %LINK-5-CHANGED: Interface Serial1/7, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/0, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/1, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/2, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/3, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/4, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/5, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/6, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Serial2/7, changed state to administrati

vely down

*Aug 16 06:07:36: %LINK-5-CHANGED: Interface Hssi3/1, changed state to administrative

ly down

*Aug 16 06:07:48: %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 10.64.111.241 (Hssi3/0) is

up: new adjacency

Aug 16 13:03:57: %STANDBY-6-STATECHANGE: FastEthernet0/0.106 Group 15 state Standby -

> Active

Aug 16 13:03:57: %STANDBY-6-STATECHANGE: FastEthernet0/0.107 Group 17 state Standby -

> Active

New Member

Re: How to fix "%PA-2-UNDEFPA" ?

Your bootstrap version 11.1(5) does not recognize the adapter while booting (which is ok) so it generates an error message. Your IOS 12.1(15) does not have any problems recogizing the card so it brings it up and it works fine.

If you want to get rid of the error message load a higher boot version of the IOS. This way you make sure that the card works even if the router just boots the bootstrap IOS.

191
Views
0
Helpful
3
Replies
CreatePlease to create content