i do have my routing table in Router 1 look like this:
S 10.40.0.0 [1/0] via 22.214.171.124
S 10.50.0.0 [1/0] via 126.96.36.199
C 10.20.0.0 is directly connected, Ethernet0/0
188.8.131.52/30 is subnetted, 1 subnets
C 184.108.40.206 is directly connected, Serial0/0
220.127.116.11/30 is subnetted, 1 subnets
C 18.104.22.168 is directly connected, Serial0/1
S* 0.0.0.0/0 [1/0] via 10.20.1.10
the last static route (default route) is directed to our proxy (10.20.1.10) that means all IP packets not handled by Router 1 routing talbe will be forwarded to proxy.
now my problem is that if anyone of this branch link goes down (eg, router 2 link) router 1 is transferring all packets to my proxy and huge network usage is happening on my proxy. i need to force a route destined to network 10.50.0.0 through one path only. if that link down, drop the packet. dont re-route to the default route.
How can i do this. if any onw knows please help me.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...