Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

How to implement load balancing on E1 serial ports ?

I am having a 7206 Router running OSPF and EBGP multihop. For a particular network I have 2 E1 Links. I want to have load balancing on these links. How can I achieve this ?

1 REPLY
Anonymous
N/A

Re: How to implement load balancing on E1 serial ports ?

It depends on whether you would

like to load balance across links

that are running OSPF or BGP. If you

would like to load share across the OSPF

links then as long as they are equal cost

links OSPF will load share by default

across equal cost paths.

If you are trying to load share across

two links configured for eBGP and both

connections terminate in the same AS then

you will need to establish your EBGP

peering using loopback addresses on both

routers termintating the two connections.

You will then need to use bgp neighbor command

ebgp-multihop.

For more detialed information please

refer to the following url:

http://www.cisco.com/warp/public/459/40.html

104
Views
0
Helpful
1
Replies
CreatePlease to create content