04-24-2003 01:46 AM - edited 03-02-2019 06:52 AM
I don't know how to monitor 3550 utilization.I can show system to view peak traffic on 6509. Are there any like command on 3550?
BTW,I know sh proc cpu and sh proc mem.
thanks!
6509> sh system
PS1-Status PS2-Status
---------- ----------
ok ok
Fan-Status Temp-Alarm Sys-Status Uptime d,h:m:s Logout
---------- ---------- ---------- -------------- ---------
ok off ok 11,13:07:48 20 min
PS1-Type PS2-Type
-------------------- --------------------
WS-CAC-1300W WS-CAC-1300W
Modem Baud Traffic Peak Peak-Time
------- ----- ------- ---- -------------------------
disable 9600 0% 1% Sun Apr 13 2003, 12:12:07
PS1 Capacity: 1153.32 Watts (27.46 Amps @42V)
PS2 Capacity: 1153.32 Watts (27.46 Amps @42V)
PS Configuration : PS1 and PS2 in Redundant Configuration.
System Name System Location System Contact CC
------------------------ ------------------------ ------------------------ ---
04-30-2003 07:18 AM
To monitor port utilization on the 3550, you could use CiscoView for real-time statistics.If you want this information for an extended period of time, you will need to use either Traffic Director or nGenius Real Time Monitor.
http://www.cisco.com/warp/partner/synchronicd/cc/pd/wr2k/lnmn/ngenius/prodlit/ngeni_ds.htm
04-30-2003 08:15 AM
Hi Henrybb,
Other tool that also good is MRTG please visit http://www.mrtg.org.
Hm.........this monitor tool is really cool.
BEst Regards,
HATO
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: