04-17-2006 03:33 AM - edited 03-03-2019 02:50 AM
Hello!
I have 4 flows sent with a constant rate 100 pkts per second. The packet size in each flow is 1400 bytes.
After passing WRED each flow gets some packet loss and delay variation.
My question: In WRED The queue size for each flow must oscilate (it is not constant) But on tje output of the router cisco 7206 I get the constant RTT for each flow.
How can it be?
IN the attachments are the LOSS&RTT graphs for the flows
Router configuration:
policy-map gold
class af11
bandwidth percent 60
random-detect dscp-based
random-detect dscp 10 32 40 10
class af12
bandwidth percent 10
random-detect dscp-based
random-detect dscp 12 28 40 10
class af13
bandwidth percent 10
random-detect dscp-based
random-detect dscp 14 24 40 10
class class-default
bandwidth percent 10
random-detect dscp-based
random-detect dscp 0 20 40 10
.................
!
interface ATM2/0.34 point-to-point
description RBNet
bandwidth 2000
ip address 10.0.4.1 255.255.255.252
pvc rbnet 15/64
ubr 2000
tx-ring-limit 3
encapsulation aal5mux ip
service-policy output gold
!
04-17-2006 03:35 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: