Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started.

New Member

How to set higher idle-timeout for all virtual-profiles?

Hi,

I have one ISDN primary interface with dialer-profiles and also virtual-profiles configured using the same physical interface.

router(config)#int s1/0:15

router(config-if)#dialer pool 1

router(config-if)#dialer idle-timeout 1800

%Remove Dialer Profile Configuration first

On the dialer profiles I can enter the "dialer idle-timeout 1800" and this overwrites the physical interface default setting of 120.

But I would like a higher value for all virtual-profiles (without defining a parameter on the tacacs-server for each profile separately)

Is there any way to configure this (maybe on the virtual-template)?

Regards,

Chris

  • Other Network Infrastructure Subjects
2 REPLIES
Bronze

Re: How to set higher idle-timeout for all virtual-profiles?

Chris,

You can do this on virtual templates. The two commands that you are looking for is "ip idle-group" which defines interesting traffic with an access-list and "ppp timeout idle". Heres a link that describes this feature. It is a 12.2T enhancement.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080087c43.html

Daniel

New Member

Re: How to set higher idle-timeout for all virtual-profiles?

I already tried "ppp timeout idle" on the "virtual-template" but I have the problem, that this setting does not overwrite the dialer-idletimout setting on the physical interface where the idletimout-parameter is not changeable if the interface is configured for dialer-profiles.

As soon as the physical default dialer-idletimeout is reached the connection is closed.

Setting the idletimeout on the tacacs is the only thing I found which overwrites also the physical setting.

Regards,

Chris

91
Views
4
Helpful
2
Replies