How to set snmp trap ?

jiangcy · ‎09-25-2002

My router 3640 12.1T,I want it send link up or down status to hp openview.

I has use " snmp-server host 10.1.1.1 informs ver 2c public snmp" .There is not packet send to ov. When i use " snmp-server host 10.1.1.1 trap snmp,there are snmp packets send to ov.

How to set? Can you help?

andrea.meconi · ‎09-25-2002

Hello,

with snmp-server host 10.1.1.1 trap snmp command you configure the router to send only the snmp trap to the host 10.1.1.1.

Andrea.

rmushtaq · ‎09-25-2002

See: http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html

jiangcy · ‎09-25-2002

I has seen : http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html.

I only want to send a inform when the link up or down.

I set : snmp-server host 10.1.1.1 informs ver 2c public snmp

snmp-server enble informs(when i set .this line can not see in running-config)

But when the link up , no packet is sent!