04-04-2003 12:34 AM - edited 03-02-2019 06:24 AM
Hi,
Can anyone point me to the correct procedure to upgrade a 4503 (with Sup4, 6Port GBic and 24port 10/100/1000 Ethernets) from CATOS 7.1.4 to IOS 12.1.14
I have not done this before, and would like some guidance.
Thanks in advance,
Jim
04-04-2003 02:01 AM
Hi Jim
I just browsed through your request and thought this link will be useful.
http://www.cisco.com/en/US/products/hw/switches/ps663/prod_release_note09186a0080144e6f.html
Kindly revert in case of any further clarification
Regards
Vatsan
04-05-2003 08:25 PM
Thank, this is useful.
But there is no mention of how to go from CATOS to IOS.
I have a supervisor 4 engine, so it looks like i will have no issues.
So I assume that I just TFTP the new IOS to FLASH and reboot?
Is it as simple as that?
regards,
Jim
04-05-2003 08:28 PM
You cannot upgrade a Sup2 to IOS
04-04-2003 06:43 AM
You cannot upgrade Supervisor 2 Engine to IOS. It supports CAT OS only. If you want IOS, you'll need a Supervisor 3 or 4 Engine
04-06-2003 03:23 AM
Yes, I do have a supervisor 4 engine.
I read the release notes for 12.1.14-3w and it says i need to uopgrade the supervisor 4 ROMMON to the "cat4000-sup3-promupgrade-121_12r_EW".
But I cant find it anywhere on the cisco web site.???
04-06-2003 04:06 AM
I finally found the ROMMON image, thanks....
Any other tips apart form backing up the original files.....?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide