Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

How to upgrade the WS-X5410 - 9 port Gigabit module?

I have read the release notes for the various S/W versions that can run on this card and I have checked the Installation and Configuration note for this card. Yet I cannot fine the procedure to upgrade the S/W on the WS-X5410 card.

What is the procedure to upgrade the S/W on this card from say 4.5.1 to 5.5.10 or later.

2 REPLIES

Re: How to upgrade the WS-X5410 - 9 port Gigabit module?

Hi Friend,

This is just a line card and you need not upgrade a particular line card in chassis.

You have to upgrade the sup engine if you want his line card to run 5.5.10 release

To upgrade the sup engine have a look at this link

http://www.cisco.com/warp/public/473/160.html#task1

HTH, if yes please rate the post.

Ankur

Community Member

ankurbhasin : In his post 11

ankurbhasin :

 

In his post 11 years ago (circa 2003), Prashanth Krishnappa says differently.

Please see:

https://supportforums.cisco.com/discussion/9326956/cat5509-ws-x5410

 

148
Views
0
Helpful
2
Replies
CreatePlease to create content