11-18-2003 12:58 PM - edited 03-02-2019 11:48 AM
hi can anyone guide me to replace an old ios image in a 1. read only and
2. read/write flash
in 2500 and 2600 routers
the problem is ive got some old ios runnin in them .. so i need the proper method to replace it with this new image . Thankyou..
11-24-2003 04:02 PM
The procedure to upgrade the IOS in a 2500 is as described at http://www.cisco.com/en/US/partner/products/hw/iad/ps497/products_tech_note09186a0080110d2c.shtml.
For the 2600, refer to
You could also refer to the technical documentation for more version specific upgrade details.
11-26-2003 11:51 AM
im sorry but i dont have a cco login id :(
can anyone help..
11-27-2003 04:50 AM
Hi,
the same documents are available on:
http://www.cisco.com/warp/public/130/sw_upgrade_proc_flash.pdf
http://www.cisco.com/warp/public/130/sw_upgrade_proc_ram.pdf
http://www.cisco.com/univercd/home/home.htm
without CCO login required.
Regards,
Milan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: