Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

how to use default route achieving load-balancing?

show me an example

thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: how to use default route achieving load-balancing?

Try this:

ip cef

ip route 0.0.0.0 0.0.0.0 Serial0

ip route 0.0.0.0 0.0.0.0 Serial1

With the above config, the router will perform per-destination load-balancing. So for example, a session to IP 10.1.1.1 may go over Serial0 while the session to IP 192.168.1.1 may go over Serial1.

Pls do remember to rate posts.

Paresh

2 REPLIES

Re: how to use default route achieving load-balancing?

Hi Friend,

If you have 2 default route with same admin distance you can have equa load balancing.

Something like this

ip route 0.0.0.0 0.0.0.0

ip route 0.0.0.0 0.0.0.0

Now because these 2 default routes have equal admin distance so both will be peferred and will result into equal load ballancing.

HTH, if yes please rate the post.

Ankur

Purple

Re: how to use default route achieving load-balancing?

Try this:

ip cef

ip route 0.0.0.0 0.0.0.0 Serial0

ip route 0.0.0.0 0.0.0.0 Serial1

With the above config, the router will perform per-destination load-balancing. So for example, a session to IP 10.1.1.1 may go over Serial0 while the session to IP 192.168.1.1 may go over Serial1.

Pls do remember to rate posts.

Paresh

112
Views
0
Helpful
2
Replies
CreatePlease to create content