HSRP configuration on a 2621router and a VPN 3000 concentrator
From a client network there is a frame relay to their production environment to their datacenter. There is also a VPN Concentrator as well and they want to use the frame connection as their primary way to get to the production environment and use a VPN connection as their secondary. Both connections are in place and right now. I am using the frame as our gateway. Can I configure HSRP on the router? I am using 6509 and 5509 for switching. I would like to automate this process and not to change the default traffic manually. Any suggestions? Thank you in advance for your help?
Re: HSRP configuration on a 2621router and a VPN 3000 concentrat
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...