Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HSRP

I'm trying to use HSRP using a serial connection as the primary and an ISDN line as the secondary, i get it working but when the main line comes back up the ISDN won't hang up. Does anyone have a sample configuration using a 2621 as the primary and a 1700 as a secondary?

2 REPLIES
New Member

Re: HSRP

Hi.

Sorry... but can you elaborate a bit more?...

NM

Cisco Employee

Re: HSRP

when the primary links get back up, does the router becomes HSRP active again ? (use preempt to make sure it does).

Then, if all the traffic is going to the primary and nothing goes to the secondary, it should finally timeout if the idle-timeout and the dialer-list is correctly configured.

Do you permit routing protocol on the secondary link ? If so, you might want to use the dialer-watch feature to detect the primary link going up and down

If so,

93
Views
0
Helpful
2
Replies