Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

HSRP

Hi,

I have got 1 3750(main) & 1 3550(standby), i had given the HSRP commands also, now when 3750 goes down 3550 will take care of the network client switches & servers, now for testing i have switched off the 3750, 3550 is taking atleast 30 sec to come up on the network, now how do i reduce the timings, because having 30 seconds down time on the network is really a big problem, so i wanted it to be less than 10 seconds, how do i do that? thanks in advance.

1 REPLY

Re: HSRP

Hi Anand,

The default hold timer is 3 seconds and hold timer is 10 seconds so the fallback should not be more than 10 seconds.

I think you have changed the default timers as hello timer to 10 and hold timer as 30 seconds?

If yes change it back to 3 and 10 seconds to work as you want.

standby [group-number] timers

Check this link for more details

http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12119ea1/3550scg/swhsrp.htm#1044417

HTH

Ankur

95
Views
0
Helpful
1
Replies
CreatePlease to create content