Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

HTML files on 2900 switches

Hi

I am currently upgrading the 2900xl switches to c2900xl-c3h2s-mz.120-5.WC3.bin to cover snmp vunerabilities. The problem I have come up against is the html access. What I have been doing is deleteing the existing bin file and replacing it with the one above. I then reload the switch and it boots from the new IOS image. But then the html access doesnt work. I have tried loading a tar image instead of an "mz" but the switch wouldnt boot at all. Any guidelines would be appreciated. I have no problem upgrading but the html access is still required.

Thanks in advance.

2 REPLIES

Re: HTML files on 2900 switches

Use the .tar file but upgrade via html access (Visual Switch Manager) - that's the easiest way. If you want to upgrade via CLI it is about 10 step procedure. See instructions in

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35sa6/scg/kiconfig.htm#xtocid2727840

HTH,

Milan Kulik

New Member

Re: HTML files on 2900 switches

Thanks

105
Views
0
Helpful
2
Replies
CreatePlease to create content