cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
591
Views
0
Helpful
2
Replies

HWIC-4ESW Vs. NM-16ESW

jolo07310
Level 5
Level 5

What exactly different between these two modules other than port density?? Also, I knew that one is HWIC slot and another one is NM slot.

Are their feature set same??

Thanks

1 Accepted Solution

Accepted Solutions

Bobby Thekkekandam
Cisco Employee
Cisco Employee

Hi,

The feature differences between the various Switch Modules are outlined here:

http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd802a9470.shtml

HTH,

Bobby

*Please rate helpful posts.

View solution in original post

2 Replies 2

Bobby Thekkekandam
Cisco Employee
Cisco Employee

Hi,

The feature differences between the various Switch Modules are outlined here:

http://www.cisco.com/en/US/products/ps5854/products_qanda_item0900aecd802a9470.shtml

HTH,

Bobby

*Please rate helpful posts.

thomuff
Level 3
Level 3

A difference I found is the 1800 series routers don't support the NM-16ESW module

The only other thing that might be different is Layer 3 Diffserv support.

I was comparing the two data sheets

http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8016bf0b.html

and

http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00801aca3e.html

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: