Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Hyper terminal + configuration register

what setting should be in hyper terminal if it is connected by com port to pc.

and i know if we want to router boot from flash configration register value should be 2102.it means if any other value is in register it will not boot from flash and it must boot from Rom.is it so? ple reply in detail.

thanks,

regards,

saga.

1 REPLY
Cisco Employee

Re: Hyper terminal + configuration register

In order to get the console access of the router using the hyperterminal, you need to have 9600,8,N,1 on the hyperterminal..

Here is the place which discuss that

http://www.cisco.com/warp/public/701/14.html#consoleport

Now here is the place which discuss the different value and effects of the configuration register settings

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2000/c2000qs/22812.htm

http://www.cisco.com/warp/public/63/lose_config_6201.html

366
Views
0
Helpful
1
Replies
CreatePlease to create content