Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

HYPERTERMINAL

I am having trouble connecting to the console port of my cisco 2611 router using hyperterminal. I set it for 9600,8,1,none but I get nothing on the screen. My router lights are green which should indicate that everything is fine with the router. I tried a different pc and the same thing. I tried another 2611 as will as a 1900 switch and still had the same problem. Can anyone offer any solutions?

Thanks!

2 REPLIES
Cisco Employee

Re: HYPERTERMINAL

I guess you checked the cable? Try to set flow control to "none" and see if this works..

New Member

Re: HYPERTERMINAL

Hi,

Please , check the COM port u r connecting.

Some times a user selects a diffrnt port whr as physically he connects to diffrnt port.

Secondly, Try to use a diffrnt console cable.

Himanshu verma

409
Views
0
Helpful
2
Replies
CreatePlease to create content