cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
212
Views
0
Helpful
1
Replies

I am getting ignored packets on a 2900XL interfaces, What does it means?

syves
Level 1
Level 1

FastEthernet0/3 is up, line protocol is up

Hardware is Fast Ethernet, address is 0003.6bf8.4d03 (bia 0003.6bf8.4d03)

Description: FW2-PRI

MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive not set

Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output 00:00:00, output hang never

Last clearing of "show interface" counters never

Queueing strategy: fifo

Output queue 0/40, 0 drops; input queue 0/75, 0 drops

5 minute input rate 48000 bits/sec, 47 packets/sec

5 minute output rate 294000 bits/sec, 65 packets/sec

1489250950 packets input, 2897753311 bytes

Received 97216 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 30006 ignored

0 watchdog, 0 multicast

0 input packets with dribble condition detected

2435430933 packets output, 2036750002 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

1 Reply 1

brad-denham
Level 1
Level 1

Ignored packets are those that are discarded because the interface hardware does not have enough internal buffers