I can´t access via ciscoview to my Catalyst 6509, but i can access to my others cat2900xl switches from it , i have ciscoworks2000 working togheter with Openview NNM, browser ask me for cat6509 ip address and after for read and write comunity strings then the browser send me this message
timeout for x.x.x.x (ip address of cat65009)
( i can pingin it from the server and i can see it via snmp from openview )
i checked both comunity string at ciscoworks2000 and cat6509 they are the same so i changed the preferences for timeout and it don´t work yet ?
somebody has seen this before, URL would be great !!!!
Re: I can´t access via ciscoview to my Catalyst 65009
thank for you replay, i thinking that is the software , because it work very well with the other switches, and i can reach it via snmp by openview but not by cisco view going to patch it or something like that, o reinstall all and to update the IOS from cat9509
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...