04-11-2002 07:34 PM - edited 03-01-2019 09:16 PM
I have run the CFM server with the command /opt/CSCOcfm/cfm start, but when I browse the client window, it says:"Client is unable to connect to the Server. Please make sure that the server is running." Why?
04-12-2002 11:01 AM
Have a look at http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cfm/cfm_1_2/install/w2k/nt_trbl.htm. Make sure that you're using the supporte browser and the CFM processes are running.
04-14-2002 04:00 AM
The document says: "If when you launch a browser you get the message "Could not connect to CFM Server problem," check drive:\Program Files\CSCOpx\etc\cfm\logFile.0 for possible errors. "
but I found that the directionary /opt/CSCOpx/etc can be found and /opt/CSCOpx/etc/cfm can't be found.
the document says :"The CFM server is a daemon manager process. To restart the daemon manager, refer to Installing and Setting Up CiscoWorks2000 CD One."
but i can't fond the messages to restart the daemon manager in the document"Installing and Setting Up CiscoWorks2000 CD One" my CD One is the second edition.
04-14-2002 12:21 PM
On Solaris, to stop the CW2K daemon manager, execute as root, /etc/init.d/dmgtd stop. To start it, /etc/init.d/dmgtd start
04-14-2002 06:26 PM
I restart the dmgtd manager,but still get the message "Could not connect to CFM Server problem," I tried to find the error log,but I can't find the path of this log file.
I think drive:\Program Files\CSCOpx\etc\cfm\logFile.0 is a NT path,but my operation system is solaris 5.7.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide