Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

I don't get to place to work the C801 with the switch ISDN

I have 2 router (C2522 and C2520) connected in the same switch ISDN and

they are working without problems. I am configuring the router C801 in

the same way that I configured the others. In the router C801 just the

layer 1 this activates (after tying the termination jumpers). The layer 2

presents state ESTABLISH_AWAITING_TEI.

do I have something more to do?

1 REPLY
Community Member

Re: I don't get to place to work the C801 with the switch ISDN

Cisco recommends the NI1 compatibility package R on the 801/802 in some instances. Investigate here:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800swcfg/provisio.htm#xtocid8

102
Views
0
Helpful
1
Replies
CreatePlease to create content