Explanation A higher priority feature has been removed. The lower priority feature is now active.
Recommended Action No action is required. The lower priority feature is enabled because the higher priority feature is removed.
This could be (depending on what you are doing on the GSR or what type line cards (i.e Engine 1, etc) a defect in IOS, something with ACL (guessing here) that is causing your line card to change it's microcode bundle due to feature change????
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...