Here is what I am trying to do. I have 3 1601 routers on a frame relay net work. All 3 routers have s0.1 connected back to our corporate office. Now, I also have sperate PVCs connecting those routers to one another, so, router A has a PVC to corporate on s0.1 and a PVC to router B on s0.2. Router B has a PVC to corporate on s0.1, s0.2 is to router A and s0.3 is a PVC to router C. Router C has a PVC to corporate on s0.1 and s0.2 is its connection to router B. The problem is, the PVCs back to corporate all work fine, but the PVCs to one another do not. I can get router A to talk to router B, but only if I shut down the connection from router B to router C. Below are the configs for all 3 routers. I know I am missing something here, any help would be appreciated.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...