I want to connect my Exchange server over Cisco 760 router to internet mail
I have heard that when you want to connect your exchange server to a SMTP internet server over a cisco (760) router, you have to transport all your incoming traffic at port 25 at the router (static ip address) to port 25 of your exchange server (in my case in 192.168.*.* range).
But I don't know how to do that.
(I have just set up the router for internet access for the first time and that works really fine)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...