I want to use an ISDN PRI for both V.110 and V.90 dial-in users.
We have a requirement for both standard Dial-in User access, and also a wireless requirement for dialing into the router via GSM.
We have a 3640 router with an ISDN PRI, and 30 Modem card. Is it possible to configure this router to accept both types of call (V.90 and V.110)via the same PRI, or do I have to have a separate PRI (or a group of BRI's) for one of the requirements.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...