11-16-2003 02:28 PM - edited 03-02-2019 11:44 AM
hi
i wants to communicate to sites via vpn .i use 7200 series bras but the problem is the router routes different network ID's and my client insist to communicate the 2 sites with the same class and same subnet ips
example: site 1 ip address is 192.168.0.2/24
site 2 ip address is 192.168.0.3/24
as we know router routes only different networks. is there any possability that i can communicate these 2 sites with these 2 same subnet ip's
plz tells me.
thankx
fareed
11-16-2003 09:08 PM
Not without bridging or double-NATing.
You might be able to move him to a Class B and do some tricks with the subnet mask and VLSM, but that'd still be different subnets.
You might be able to do something with IRB ... whatever way you go, split sites on one network block is an ugly thing.
Good Luck
Scott
11-17-2003 04:20 AM
Hi
another possibility is to use NAT in order to translate one network side.
bye
11-19-2003 10:36 PM
hi,
first of all thankx 4 ur keen interst but actully the problem is my client not wants to implement Natting of Ip's .actully he doesn't intersted in any ip except those i already mensioned.
he dont wants any new ip in their vpn which is later on Natted.
i hpoe u will tellme any other solution too.
bye 4 now
fareed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide