I have AIR-AP1131AG. but I don't knwo about AP config at all.
I need your help and detail.
thank you.
Next is my AP confiuration.
--------------------------------------
ip subnet-zero
!
!
no aaa new-model
!
dot11 ssid uos01
authentication open
guest-mode
!
power inline negotiation prestandard source
!
!
username xxxx password xxxx
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid uos01
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface Dot11Radio1
no ip address
no ip route-cache
!
ssid uos01
!
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address x.x.x.x x.x.x.x
no ip route-cache
!
ip default-gateway x.x.x.x
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
control-plane
!
bridge 1 route ip
!
!
!
line con 0
transport preferred all
transport output all
line vty 0 4
password xxxx
login
transport preferred all
transport input all
transport output all
line vty 5 15
password xxxx
login
transport preferred all
transport input all
transport output all
!
end
ap#
-----------------------------------
I wait your answer.
