Hi all. I wonder if anyone has any experience of the following they could perhaps relay to me.
We have 3 IBM Shark units on site, each with two Clusters and each of those with its own I.P. address. Recently, we have been receiving only intermittent transmission from one cluster of a particular machine, and it has been dropping a few pings now and then when we've been having a look at it. We would expect both clusters in this machine to show ARPA packets, but this one problem cluster is showing SNAP, and in conjunction with this is showing as an invalid CEF adjacency.
I am wondering if the Ethernet packet type is a configurable option from within the machine itself but am only guessing.
Can anybody advise as to what I should be looking at?
Hi Glen. This does indeed work thanks, but we're thinking we might not have fixed the problem at source. We are currently in the process of trying to find out from IBM if packet type is a configurable parameter within the Shark unit itself. Hopefully it is and we can just change it, leaving things as they are ARP-wise.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...