Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Identify Supvis 5530 with console output

Hello,

I have two boards to check which modeltyp they are.

Had a look on cisco docs,found a table,not enough.

1.Board(customers board), labeled with WS-X5530, Supervisor EngineIII-NFFC. sho mod :

-----------

Console> (enable) sh mod 1

Mod Module-Name Ports Module-Type Model Serial-Num Status

--- ------------------- ----- --------------------- --------- --------- -------

1 0 Supervisor III WS-X5530 012106115 ok

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-90-ab-6e-c4-00 to 00-90-ab-6e-c7-ff 3.0 3.1.2 4.5(4)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC WS-F5521 0012105995 1.1

Console> (enable)

-----------

second (our)board, labeled with WS-X5530-E3, SupervisorIII-NFFC II.

sh mod :

Console> (enable) sh mod

Mod Module-Name Ports Module-Type Model Serial-Num Status

--- ------------------- ----- --------------------- --------- --------- -------

1 0 Supervisor III WS-X5530 012144740 ok

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-90-ab-6e-c4-00 to 00-90-ab-6e-c7-ff 3.5 5.1(2) 4.5(4)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC II WS-F5531 0012141584 1.0

Console> (enable)

Questions:

Which is the exactly Modelnumber for ordering each of this cards?

I don't find the combination for NFFC II and WS-F5521, as described in customers delivery notes.

Thanks for help

Ruedi

2 REPLIES
VIP Purple

Re: Identify Supvis 5530 with console output

Hello,

I think the NFFC II WS-F5521 is listed because this card is integrated into the Supervisor III.

So, you cannot individually order the NFFC II WS-F5521, as it is integrated into the Catalyst 5500/5000 Series Supervisor Engine III with NFFC II, which has part number WS-X5530-E3.

WS-X5530-E2 --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC

WS-X5530-E2= --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC (spare)

WS-X5530-E3 --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC II

WS-X5530-E3= --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC II (spare)

Keep in mind that these are EOL/EOS products and cannot be ordered anymore:

End of Life of the Catalyst 5000 Family Supervisor Engine III with NFFC and Supervisor Engine III with NFFC II (WS-X5530-E2, WS-X5530-E3, WS-F5521=, WS-F5531=)

http://www.cisco.com/warp/public/cc/pd/si/casi/ca5000/prodlit/1034_pp.htm

Regards,

Georg

New Member

Re: Identify Supvis 5530 with console output

Hello George,

Thanks for explanations. But, could you explain me, if the following 'card'is a E3 or E3A? (The customer sent us this card and he want a E3A as spare.

Thanks and regards

Ruedi

-----------------------

Console> (enable) sh mod 1

Mod Module-Name Ports Module-Type Model Serial-Num Status

--- ------------------- ----- --------------------- --------- --------- -------

1 0 Supervisor III WS-X5530 012106115 ok

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-90-ab-6e-c4-00 to 00-90-ab-6e-c7-ff 3.0 3.1.2 4.5(4)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC WS-F5521 0012105995 1.1

Console> (enable)

-----------

154
Views
0
Helpful
2
Replies
CreatePlease to create content