Looking to replace a flat (mostly) hub-based LAN. My thought is to place a 3750 standard image at the core with 2950's at the edge closets. Both support IGMP through version 3. Do I need anything more to control multicast traffic from the Ghost server to the PC's at the edge? There are no VLAN's necessitating routing, or CGMP management of multicast? Am I on track here?
You need an IGMP querier even when you do not have more then one vlan. Ofcourse once you start creating multiple vlans , you will need an EMI image on a 3750 to do Multicast routing , but for a single vlan env , you will have to enable igmp querier functionality.
ip igmp snooping querier
There has to be atleast one L3 / vlan interface in an "UP" state for igmp querier to work.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...