Can the IGX 8410 support a DS3 in bulk distribution like the MGX 8220 SRM-T3 card can do? I use bulk distribution on the mgx 8220 mapping the DS1 time slots to AUSM cards. Now I'm wanting to do the same thing with my IGX 8410, it has in it UXM-T3 card and UXM-T1 ports that would be mapped to the time slots. Please let me know, thanks bob
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...