ILMI State is "UpAndNormal" between the routers(7200) which says that 0/16 PVC is up and both routers are reporting the correct Remote peer IP address.I have this PVC 0/364 which has "ILMI MANAGE" enabled (OAM manage is disabled) on both routers, but for some reason I could not bring this PVC UP.SHOW ATM PVC is reporting
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...